Layer 2 Point-to-Point Test Checklist Template
Start with a free 30-day trial. No credit card required.
100% fully customizable point-to-point testing checklist
Export data to other formats like PDF or CSV
Access your checklist on any device
Discover thousands of other quality test checklists
~10,000 employees
~500 employees
~10 employees
~25,000 employees
~200 employees
~1,500 employees
~20 employees
What is a Layer 2 Point-to-Point Test Checklist?
A Layer 2 Point-to-Point (P2P) Checklist is a document technicians and engineers can use to help guide them through the testing phase of a point-to-point connection or data link. Point-to-point connections typically refer to a private line of connection between two points that form a closed network. A good point-to-point test checklist should cover tests for connectivity, coverage, and performance and ensure the completeness and quality of the tests themselves.
While there is no single regulation that specifically targets Layer 2 P2P installation and testing, regulatory bodies like ISO/IEC and the British Standard do provide instructions on cable and network system installation and test practices. Nonetheless, system tests and checks are important to ensure correct installation, performance, and SLA compliance with the designed or intended use.
Compare this Layer 2 point to point testing checklist with forms built on other formats
Use this Layer 2 Point-to-Point Test Checklist template for free.
What is a Layer 2 Point-to-Point connection?
A Layer 2 Point-to-Point connection is a type connection that refers to a direct, private link between two points (such as routers) that operates in Layer 2 of the Open Systems Interconnection (OSI) Model. We can break down this definition by discussing Layer 2 connections and Point-to-Point connections:
Layer 2, coined the Direct Link layer, is part of the 7-layer OSI model, and is where data moves directly between two devices without the need of an intermediary. Connections in this layer typically operate within the same network. It is important to note that P2P connections are not limited to physical cable connections like ethernet cables. Wireless connections like Wi-Fi, remote controlled devices, and laser links, are also considered to be Layer 2 for as long as they are direct connections.
Point-to-Point (P2P) connections can easily be described as the direct link between two devices only. Data passes between these two devices or points, and does not disperse to other devices or networks. This makes P2P connections one of the most secure and speedy forms of connections, as there are no other devices or signals that interrupt communication.
When Should Layer 2 Point-to-Point connections be Used?
Layer 2 P2P connections can be used for a wide variety of applications, but are typically used when simplicity and performance is a priority. Layer 2 P2P connections can commonly be seen used when a dedicated, high-bandwidth, and low-latency connection is required. Further, an important characteristic of these connections is the low packet-loss that is experienced between the two points, which happens when small units of data, or “packets”, fail to reach the intended destination.
A high quality of service (QoS) can be expected from Layer 2 P2P connections due to the nature of how data goes back and forth through dedicated routes. This is highly relevant for services like data center interconnection, high frequency trading, telecommunication services, and broadcast & media. However, it is important to note that these types of connections are also expected to cost more due to installation and maintenance costs, when compared to using public internet connectivity.
Frequently Asked Questions
Why is this the best Layer 2 Point-to-Point Test Checklist template?
Dashpivot’s Layer 2 Point-to-Point Test Checklist helps you manage and simplify testing tasks and helps you document your findings and comments for each. You can even add photos, personnel sign-offs, and export the checklist when you’re done.
Does this checklist comply with relevant industry standards for network testing?
Yes, this checklist was built around common and important regulations set by the ISO/IEC, the British Standard, and the TIA. Dashpivot's flexibility allows users to format this test checklist into the local standards they follow.
Can I add my own checklist items to the template?
Yes, with Dashpivot’s drag-and-drop template builder, you can easily add, remove, and edit any portion of the checklist to tailor-fit your needs. It's fully editable and you can create hundreds and thousands of versions that cater to all sorts of projects.
What other formats is this checklist available in?
After you complete editing and populating your checklist on your phone, tablet, or desktop, you can easily export the final document and data to PDF or CSV.
Other popular templates you can use and edit for free
Network Commissioning Test Plan
Plan out your network testing from start to finish in full detail and convenience using this plan.
Cable Inspection Checklist
Stay on top of your cable inspections, including real-time field reporting, with this flexible checklist.
Cable Continuity Checklist
Reflect company guidelines and SOPs while performing cable continuity inspections using this flexible digital template.
This checklist was generated with Dashpivot software
Go digital - streamline your workflow by taking your tasks online.
- Access, edit and complete Layer 2 P2P test checklist from any device - mobile, tablet or computer.
- Print, download or send your test checklist as perfectly formatted PDF documents with your company logo.
- Store your checklists securely online, where they can be searched and found in seconds
- Invite internal and external parties to see, edit and sign off on checklists online.
Sitemate builds best-in-class software tools for built world companies.
English (United States) 
English (Australia) 
English (UK) 
English (New Zealand) 
English (South Africa) 
German